Mercedes-Benz GL-Class: Turn signals
1 High-beam headlamps
2 Right turn signal
3 High-beam flasher
4 Left turn signal
► To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 or 4.
The corresponding turn signal flashes three times.
► To indicate: press the combination switch beyond the pressure point in the direction of arrow 2 or 4.
► To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to position 2 or start the engine.
► Turn the light switch to
.
► Press the combination switch beyond the pressure point in the direction of arrow 1.
The indicator lamp in the
instrument
cluster lights up.
► To switch off the high-beam headlamps: move the combination switch back to its normal position.
The indicator lamp in the
instrument
cluster goes out.
High-beam flasher
► To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
► Pull the combination switch in the
direction
of arrow 3. ...
See also:
Safety Belt Extender
If the vehicle's safety belt will fasten around you, you should use it.
But if a safety belt is not long enough, your dealer will order you an extender.
When you go in to order it, take the hea ...
All-Wheel Drive
It is not necessary to check the all–wheel drive lubricant levels.
► fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle
to the dealer as soon as possible. ...
When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1
L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right
Engine Oil” in this section fo ...