Mercedes-Benz GL-Class: Transmission position display
The current transmission position is shown in the multifunction display.
1 Transmission position
The arrows in the transmission position
display show how and into which
transmission positions you can change
using the DIRECT SELECT lever.
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Select transmission position D.
Do not restrict the shift range.
DIRECT SELECT lever
Overview of transmission positions
The DIRECT SELECT lever is on the right of the
steering column.
P Park position with parking lock
R Reverse gear
N Neutral
D Drive
The DIRECT SELECT lever ...
Transmission positions
Park position
Do not shift the transmission into
position P() unless the
vehicle is stationary. The parking
lock should not be used as a brake
when parking. In addition to
engaging the parking ...
See also:
Ignition Positions
The ignition switch has four different positions.
To shift out of P (Park), the ignition must be in ON/RUN or ACC/ ACCESSORY and
the regular brake pedal must be applied.
A (STOPPING THE ENGINE/ L ...
NECK-PRO head restraints
Resetting the NECK-PRO head restraints
requires a lot of strength. If you have
difficulty resetting the NECK-PRO head
restraints, have this work carried out at a qualified specialist workshop, e.g ...
Brake fluid
For further brake fluid specification information,
see “Capacities and recommended
fuel/lubricants” in the “9. Technical and
consumer information” section of this
manual.
WARNING
& ...
