Mercedes-Benz GL-Class: Trailer towing - Blind Spot Assist - Driving systems - Driving and parking - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Trailer towing

When you attach a trailer, make sure you have correctly established the electrical connection. This can be accomplished by checking the trailer lighting. In this event, Blind Spot Assist is deactivated. The indicator lamp in the exterior mirrors lights up yellow and the Blind Spot Assist Currently Unavailable See Operator's Manual message appears in the multifunction display.

the exterior mirrors. You can deactivate the indicator lamps in the exterior mirrors.

To do so, switch off Blind Spot Assist when:

the SmartKey is in position 2 in the ignition lock.
the engine is not running.
the electrical connection to the trailer has been established.

    Switching on Blind Spot Assist
    ► Make sure that the radar sensor system and Blind Spot Assist are activated in the on-board computer. ► Turn the SmartKey to position 2 in the ignition lock. Warning lamps 1 light u ...

    See also:

    Leaving the Vehicle with the Engine Running
    WARNING It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if ...

    Checking Brake Fluid
    Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment Overview  . The fluid level should be above MIN. If it is not, have the brake hydraulic system checked to se ...

    Safety notes
    WARNING   Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle's electronic components are interconnec ...