Range Rover: Trailer electrical connection - Towing - Range Rover Owner's ManualRange Rover: Trailer electrical connection

Range Rover / Range Rover Owner's Manual / Towing / Trailer electrical connection

NOTICE NOTICE

Only connect approved electrical circuits, which are in good condition, to the trailer socket.

When a trailer electrical connection is made, and the vehicle’s direction indicators

When a trailer electrical connection is made, and the vehicle’s direction indicators are used, the trailer warning lamp will flash in time with the direction indicators.

    Towing weights
    See 182, WEIGHTS, for details of the Gross Vehicle Weight (GVW), Gross train weight, axle weights and maximum payload. Note: When calculating rear axle loading, remember that the trailer tongue w ...

    Towing a trailer
    WARNING Do not exceed the Gross Vehicle Weight (GVW), maximum rear axle weight, maximum trailer weight or tow hitch load (tongue weight). Exceeding any of these limits could cause instabilit ...

    See also:

    Tilt/telescopic steering
    WARNING ► Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident. ► Do not adjust the steering wheel any closer to you than ...

    Vehicle Dynamic Control (VDC) OFF switch
    The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to ...

    Air cleaner
    To remove the filter, release the lock pins 1 and pull the unit upward 2 . The filter element should not be cleaned and reused. Replace it according to the maintenance intervals. See “INFI ...