Range Rover: Starting the engine
- Switching on the ignition
- Starting the engine
- If the engine fails to start
- Switching off the engine
- Rolling re-start
Removing the detachable tow hitch
Removal of the tow hitch is the reverse of fitting.
Note: The key cannot be removed when the tow hitch has been detached. ...
Switching on the ignition
To turn on the ignition without starting the engine. Ensure the brake pedal is
not depressed, and with a valid Smart Key present in the vehicle, press the START/STOP
button and hold until the warn ...
See also:
Warning Lights, Gauges, and Indicators
WARNING lights and gauges can signal that something is wrong before it becomes
serious enough to cause an expensive repair or replacement. Paying attention to
the warning lights and gauges could ...
Mud-ruts
This program should be used for crossing terrain that is muddy, rutted, soft
or uneven.
Low range is recommended for this program and if not selected, the message center
will prompt you.
If th ...
Checking engine oil level
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn off the engine. Wait more than 15
minutes for the oil ...






