Mercedes-Benz GL-Class: Hiding display messages
You can hide some display messages with a low priority.
► Press the
,
button on the steering wheel to
select another display.
or
► Press the R reset button on the instrument cluster.
The display message is cleared.
Display messages with a high priority are shown in red.
You cannot hide display messages of the highest priority. The multifunction display shows these messages continuously until the causes for the messages have been remedied.
General information
WARNING
All categories of messages contain important information which should be taken
note of and,
where a malfunction is indicated, addressed as soon as possible at an authorized
M ...
Message memory menu
The on-board computer saves certain display messages. You can call up the
display messages
in the message memory menu.
The message memory menu is only shown if any display messages have been sto ...
See also:
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill. In order to
get an accurate reading, the vehicle must be on level ground. The engine oil dipstick
handle is a yellow loop. See Engi ...
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6
in to 1.6 in) below the bottom of the filler plug ...
4WD shift switch
► Shift the 4WD shift switch to either the
AUTO, 4H or 4L position, depending on
driving conditions.
► With the switch set to the AUTO position,
distribution of torque to the front ...