Range Rover: Stability control warning lamps - Stability control - Range Rover Owner's ManualRange Rover: Stability control warning lamps

Range Rover / Range Rover Owner's Manual / Stability control / Stability control warning lamps

The DSC warning lamp in the instrument pack illuminates briefly when the ignition

The DSC warning lamp in the instrument pack illuminates briefly when the ignition is turned on.

If the warning lamp flashes rapidly during driving, the system is active.

A fault with the DSC system is indicated by the DSC warning lamp illuminating and an associated warning message, or the DSC warning lamp flashing continuously when DSC has not been disabled. The vehicle can still be driven, but without DSC assistance. Seek qualified assistance as soon as possible.

    Switching DSC OFF
    WARNING Disabling the DSC may adversely affect vehicle stability and braking which in turn can lead to loss of control and increased braking distance, resulting in a rollover or crash. In s ...

    See also:

    Important safety notes
    WARNING   For safety reasons, switch off the windshield wipers and remove the key from the ignition lock before changing the wiper blades (vehicles with KEYLESS-GO: make sure that the o ...

    Battery Replacement
    Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC. See “REPLACE BATTERY IN REMOTE KEY” under Key and Lock Messages   for additional information. Noti ...

    Please bear the following in mind
    At the onset of winter, have your vehicle winterproofed at a qualified specialist workshop, e.g. at an authorized Mercedes- Benz Center. Observe the notes in the "Changing a wheel" se ...