Cadillac Escalade: Setting the Clock
The navigation system time and the analog clock operate independently. Changing the time through the navigation system does not change the time on the analog clock. See Clock to change the analog clock time.
Press CONFIG to enter the configure menu options, then press CONFIG repeatedly until the time is selected or press the time screen button.
Hours: Press − or + to decrease or increase the hours.
Minutes: Press − or + to decrease or increase the minutes.
12/24 Format: Select the 12 screen button for standard time; select the 24 screen button for military time.
Rear Display
Press the Rear Display(s) screen button to allow the choice of sources for rear display between front disc, rear aux, or usb, if connected. ...Global Positioning System (GPS)
The navigation system determines the position of the vehicle by using satellite signals, various vehicle signals, and map data. At times, other interferences such as the satellite condition, road co ...See also:
Cleaning after off-road driving
NOTICE
Ensure that the areas around air intakes and the front grille are clean and clear
of debris. Pay particular attention to the lower grille and radiator. Failure to
do so may cause the ...
Blind Spot Warning (BSW) system/Blind Spot InterventionTM system (if so
equipped)
The Blind Spot Warning (BSW) and Blind
Spot InterventionTM systems can help alert
the driver of other vehicles in adjacent
lanes when changing lanes.
The BSW system uses radar sensors 1
ins ...
System maintenance
► The two radar sensor units 1 for the
BSW and Blind Spot InterventionTM
systems are located near the rear
bumper. Always keep the area near
the radar sensors clean. Do not attach
st ...