Buick Enclave: Replacement Bulbs
For replacement bulbs not listed here, contact your dealer.
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license plate lamps to the liftgate
trim.
2. Turn and pull the license plate lamp forward through the liftgate trim op ...
See also:
Grade Braking
The Grade Braking shift modes can be activated by pressing the button on the
end of the shift control lever. While in Range Selection Mode, Grade Braking is
deactivated allowing the driver to select ...
Navigation System
Use of the navigation system may result in the storage of destinations, addresses,
telephone numbers, and other trip information. See Using the Navigation System for information on stored ...
Testing the Alarm
To test the alarm:
1. From inside the vehicle, lower the driver window and open the driver door.
2. Activate the system by locking the doors with the power door lock switch while
the door is open, ...
