Cadillac Escalade: Object Detection System Messages
PARKING ASSIST BLOCKED SEE OWNERS MANUAL
This message displays if there is something interfering with the park assist system. See Ultrasonic Parking Assist for more information.
PARKING ASSIST OFF
After the vehicle has been started, this message displays to remind the driver that the Ultrasonic Rear Parking Assist (URPA) system has been turned off. Press the set/reset button to acknowledge this message and clear it from the DIC display. To turn the URPA system back on, see Ultrasonic Parking Assist .
SERVICE PARKING ASSIST
This message displays if there is a problem with the Ultrasonic Rear Parking Assist (URPA) system. Do not use this system to help you park. See Ultrasonic Parking Assist for more information. See your dealer for service.
SERVICE SIDE BLIND ZONE ALERT SYSTEM
If your vehicle has the Side Blind Zone Alert (SBZA) system and this message displays, both SBZA displays will remain on indicating there is a problem with the SBZA system. If these displays remain on after continued driving, the system needs service. See your dealer. See Side Blind Zone Alert (SBZA) for more information.
SIDE BLIND ZONE ALERT SYSTEM OFF
If your vehicle has the Side Blind Zone Alert (SBZA) system, this message displays when the SBZA system has been turned off. See Side Blind Zone Alert (SBZA) and Driver Information Center (DIC) for more information.
SIDE BLIND ZONE SYSTEM UNAVAILABLE
If your vehicle has the Side Blind Zone Alert (SBZA) system, this message displays when the SBZA system is disabled because the sensor is blocked and cannot detect vehicles in your blind zone. The sensor may be blocked by mud, dirt, snow, ice, or slush. This message may also display during heavy rain or due to road spray. It may also come on when driving in isolated areas with no guardrails, trees, or road signs and light traffic. Your vehicle does not need service. For cleaning instructions, see “Washing Your Vehicle” in Exterior Care . See Side Blind Zone Alert (SBZA) for more information.
Lamp Messages
SERVICE LEFT HEADLAMP ASSEMBLY
On some models, this message will be displayed when the left headlamp is out
and needs to be serviced. See “LED Lighting” in LED Lighting for more
inf ...
Ride Control System Messages
SERVICE STABILITRAK
If your vehicle has StabiliTrak and this message displays, it means there may
be a problem with the StabiliTrak system. If you see this message, try to reset
the system. Stop; t ...
See also:
Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal
Transceiver button, complete the following.
1. Push and hold the desired HomeLink®
button. Do not release the button until
step 4 has been completed.
2. ...
Airbag Readiness Light
This light shows if there is an electrical problem. The system check includes
the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules,
the wiring, and the crash sensi ...
Setting a speed
WARNING
Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing ro ...






