Buick Enclave: Object Detection System Messages - Information Displays - Instruments and Controls - Buick Enclave Owner's ManualBuick Enclave: Object Detection System Messages

PARK ASST (Assist) BLOCKED SEE OWNERS MANUAL

This message displays if there is something interfering with the park assist system. See Ultrasonic Parking Assist  for more information.

PARK ASSIST OFF

After the vehicle has been started, this message displays to remind the driver that the URPA system has been turned off. Press the set/reset button or the trip odometer reset stem to acknowledge this message and clear it from the DIC display.

For more information see Ultrasonic Parking Assist .

SERVICE PARK ASSIST

This message displays if there is a problem with the Ultrasonic Rear Parking Assist (URPA) system.

Do not use this system to help you park. See Ultrasonic Parking Assist  for more information.

See your dealer for service.

    Lamp Messages
    AUTOMATIC LIGHT CONTROL OFF This message displays when the automatic headlamps are turned off. This message clears itself after 10 seconds. AUTOMATIC LIGHT CONTROL ON This message displays when th ...

    Ride Control System Messages
    SERVICE STABILITRAK This message displays if there is a problem with the StabiliTrak® system. If this message appears, try to reset the system. Stop; turn off the engine for at least 15 seconds; ...

    See also:

    Wheel changing
    1. Read and observe the warnings in Wheel changing safety. 2. Before raising the vehicle, use the wheel nut brace to slacken the wheel nuts half a turn counter-clockwise. 3. Position the jack unde ...

    Securing Child Restraints (Center Front Seat Position)
    WARNING A child in a child restraint in the center front seat can be badly injured or killed by the frontal airbags if they inflate. Never secure a child restraint in the center front seat. It ...

    Activating/deactivating Blind SpotAssist
    Further information about Blind Spot Assist. ► Press on the steering wheel to select the Additional functions menu. ► Press the button to select the Blind Spot Assist function. ...