Buick Enclave: Mirror Adjustment - Initial Drive Information - In Brief - Buick Enclave Owner's ManualBuick Enclave: Mirror Adjustment

Exterior Mirrors

To adjust each mirror:

To adjust each mirror:

1. Press (A) or (B) to select the mirror.
2. Press the control pad to adjust the mirror.
3. Press (A) or (B) again to deselect the mirror.

Folding Mirrors

For vehicles with power folding mirrors:

1. Press (C) to fold the mirrors out to the driving position.
2. Press (D) to fold the mirrors in to the folded position.

For vehicles with manual folding mirrors, push the mirror toward the vehicle. Pull the mirror out to return to its original position.

Interior Mirror

The automatic dimming rearview mirror reduces the glare from other vehicle headlamps. Each time the vehicle is started, the dimming feature comes on.

See Automatic Dimming Rearview Mirror

    Passenger Sensing System
    United States Canada and Mexico The passenger sensing system will turn off the right front passenger frontal airbag under certain conditions. The driver airbag, seat-mounted side impact airbag ...

    Steering Wheel Adjustment
    1. Pull the lever (A) down. 2. Move the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. 4. Push the lever (A) up to lock the steering wheel in place. Power ...

    See also:

    Traction Control System (TCS)/StabiliTrak® Light
    The TCS/StabiliTrak light comes on briefly when the engine is started. If the light does not come on or stays on, have the vehicle serviced by the dealer. If the system is working normally, the in ...

    Keyless locking
    The vehicle will not lock automatically. To lock the vehicle press the keyless locking button (arrowed) on the door handle once. The hazard warning lamps will flash once to confirm. In some marke ...

    Problems with the seat ventilation
    If one or all of the indicator lamps in the seat ventilation button are flashing, the seat ventilation has switched off automatically. The vehicle's electrical system voltage is too low because ...