Infiniti QX: Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.
Loading tips
► The GVW must not exceed GVWR
or GAWR as specified on the F.M.V.
S.S./C.M.V.S.S. certification label.
► Do not load the front and rear axle
to the GAWR. Doing so will exceed
the ...
Towing a trailer
WARNING
Overloading or improper loading of a trailer
and its cargo can adversely affect vehicle
handling, braking and performance and may
lead to accidents.
CAUTION
► Do not tow a ...
See also:
Maximum inflation pressure
The maximum pressure to which the tire should be inflated. This pressure is given
on the tire side wall in lbf/in2 (psi) and kPa.
Note: This pressure is the maximum allowed by the tire manufacturer ...
Manual Operation of Power Liftgate
To change the liftgate to manual operation, press OFF on the liftgate switch.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and closed.
To open ...
Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear.
Keep the vehicle moving to avoid getting stuck.
Traction changes when driving on sand. On loose sand, such as on beache ...
