Buick Enclave: High-Beam On Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Buick Enclave Owner's ManualBuick Enclave: High-Beam On Light

The high-beam on light comes on when the high-beam headlamps are in use.

The high-beam on light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer  for more information.

    Security Light
    The security light should come on briefly as the engine is started. If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dea ...

    Front Fog Lamp Light
    The fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps  for more information. ...

    See also:

    Engine Power Mes
    ENGINE POWER IS REDUCED This message displays and a chime sounds when the cooling system temperature gets too hot and the engine further enters the engine coolant protection mode. See Engine Overh ...

    Rear lamp removal
    To change any of the rear bulbs, it is necessary to completely remove the lamp unit from the vehicle. 1. With the tailgate open, remove the two screws from the inner edge of the unit. 2. Pull th ...

    Universal Remote System Programming
    Vehicles with the Universal Remote System will have these buttons located in the headliner. This system provides a way to replace up to three remote control transmitters used to activate devices ...