Buick Enclave: Head Restraints - Seats and Restraints - Buick Enclave Owner's ManualBuick Enclave: Head Restraints

The vehicle's front seats have adjustable head restraints in the outboard seating positions.

With head restraints that are not installed and adjusted properly, there is aWARNING
With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash.

Do not drive until the head restraints for all occupants are installed and adjusted properly.

Adjust the head restraint so that the top of the restraint is at the same height

Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant's head. This position reduces the chance of a neck injury in a crash.

1. Pull the head restraint up to raise it. To lower the head restraint, press

1. Pull the head restraint up to raise it. To lower the head restraint, press the release button, located on the head restraint post on the top of the seatback, while you push the head restraint down.
2. Push down on the head restraint after the button is released to make sure that it is locked in place.

The vehicle's second-row seats have head restraints in the outboard seating positions that cannot be adjusted.

The vehicle's third-row seats have headrests in the outboard seating positions that cannot be adjusted.

The vehicle's head restraints and headrests are not designed to be removed.

    See also:

    Infants and Young Children
    Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safe ...

    Audio Output
    Audio from the DVD player or auxiliary inputs can be heard through the following possible sources: Wireless headphones Vehicle speakers Vehicle-wired headphone jacks on the RSA system, if the ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ► The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...