Buick Enclave: Flash-to-Pass - Exterior Lighting - Lighting - Buick Enclave Owner's ManualBuick Enclave: Flash-to-Pass

This feature is used to signal to the vehicle ahead that you want to pass.

If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high beams.

Release the lever to turn the high-beam headlamps off.

    Headlamp High/ Low-Beam Changer
    Headlamp High/Low-Beam Changer: Push the turn signal/lane change lever away from you to turn the high beams on. Pull the lever toward you to return to low beams. This indicator light turns on i ...

    Daytime Running Lamps (DRL)/Automatic Headlamp System
    Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during the day. Fully functional daytime running lamps are required on all vehicles first sold in Canada ...

    See also:

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

    Tire Inspection
    We recommend that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month. Replace the tire if: The indicators at three or mor ...

    Operational indicators
    1. Engine start operation indicator This indicator appears when the selector lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch w ...