Buick Enclave: Connections
OnStar Hands-Free Calling allows calls to be made and received from the vehicle. The vehicle can also be controlled from a cell phone through the OnStar mobile app. See www.onstar.com for coverage maps.
Hands-Free Calling
1. Push . System responds:
“OnStar ready.”
2. Say “Dial.” System responds:
“Please say the name or number to call.”
3. Say the entire number without pausing, including a “1” and the area code. System
responds: “OK calling.”
Retrieve My Number
1. Push . System responds:
“OnStar ready.”
2. Say “My Number.” System responds: “Your OnStar Hands-Free Calling number is.”
End a Call
Push . System responds:
“Call ended.”
Store a Name Tag for Speed Dialing
1. Push . System responds:
“OnStar ready.”
2. Say “Store.” System responds:
“Please say the number you would like to store.”
3. Say the entire number without pausing. System responds:
“Please say the name tag.”
4. Pick a name tag. “System responds: ”About to store <name tag>. Does that sound
OK?”
5. Say “Yes” or “No” to try again.
System responds: “OK, storing <name tag>.”
Place a Call Using a Stored Number
1. Push . System responds:
“OnStar ready.”
2. Say “Call <name tag>.” System responds: “OK, calling <name tag>.”
Verify Minutes and Expiration
Push and say “minutes” then “verify”
to check how many minutes remain and their expiration date.
OnStar Mobile App
With an iPhone® or Android™-based mobile device, an OnStar mobile app can be downloaded. The vehicle can be remote started, if equipped, or the doors can be unlocked from anywhere there is cell phone service. It can also check the fuel level, tire pressure, and oil life.
It can connect to an OnStar Advisor anytime. For OnStar mobile app compatibility or further information, see www.onstar.com.
Navigation
OnStar navigation requires the Directions and Connections service plan.
Push to receive directions or have
them sent to the vehicle navigation screen. Destinations can also be forwarded to
the v ...
Diagnostics
OnStar Vehicle Diagnostics will perform a vehicle check every month. It will
check the engine, transmission, antilock brakes, and major vehicle systems. It also
checks the tire pressures, if the v ...
See also:
Entry gate/canadian programing
The technology of some entry gates requires you to press and re-press (cycle)
the hand-held transmitter button every two seconds during programing.
Continue to press and hold the desired rear-view ...
Towing weights
See 182, WEIGHTS, for details of the Gross Vehicle Weight (GVW), Gross train
weight, axle weights and maximum payload.
Note: When calculating rear axle loading, remember that the trailer tongue w ...
Connecting a starting aid
To start the vehicle using a starting aid or a slave battery, follow the instructions
in the sequence given.
1. Connect the positive (Red) booster cable to the positive battery terminal
of the di ...