Infiniti QX: Brake pad wear warning
The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur only when the brake pedal is depressed. After more wear of the brake pad, the sound will always be heard even if the brake pedal is not depressed. Have the brakes checked as soon as possible if the wear warning sound is heard. Under some driving or climate conditions, occasional brake squeak, squeal or other noise may be heard. Occasional brake noise during light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information, see the maintenance log section of your “INFINITI Service and Maintenance Guide” for maintenance intervals.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting
brakes.
The disc-type brakes self-adjust every time
the brake pedal is applied.
WARNING
See an INFINITI retailer for a brake system
check if th ...
Brake booster
Check the brake booster function as
follows:
1. With the engine off, depress and
release the foot brake pedal more than
20 times. When the foot brake pedal
movement (distance of travel) rema ...
See also:
Off-road menu
Depending on your vehicle's optional
equipment, you can set the following current
settings to be shown in the Off-road menu:
• Level control
• compass
• differential locks
Large buildings ...
Using this Manual
To quickly locate information about the vehicle, use the Index in the back of
the manual. It is an alphabetical list of what is in the manual and the page number
where it can be found. ...
Increasing Speed While Using Cruise Control
If the cruise control system is already activated,
. Press and hold the +RES button on the steering wheel until the desired speed
is reached, then release it.
. To increase vehicle speed in small a ...