Cadillac Escalade: Battery Replacement
To change the remote control batteries:
1. Slide the rear cover back on the remote control.
2. Replace the two batteries in the compartment. Make sure they are installed correctly using the diagram on the inside of the remote control.
3. Replace the battery cover. If the remote control is to be stored for a long period of time, remove the batteries and keep them in a cool, dry place.
Remote Control Buttons
(Power): Press this button to turn
the video screen on and off.
(Illumination): Press this button
to turn the remote control backlight on. The backlight automatically times out after
7 to 10 sec ...
See also:
INFINITI all-mode 4WD® system
The all mode 4WD system provides 3
positions (AUTO, 4HI and 4LO), so you
can select the desired drive mode according
to the driving conditions.
4WD shift procedure:
1: The 4LO and 4HI indic ...
Important
The information contained in this handbook covers all vehicle derivatives and
optional equipment, some of which may not be fitted to your vehicle. Due to printing
cycles, this handbook may include ...
Rear-facing child restraint installation using the seat belts
WARNING
► The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure
to use the ALR mode will result in the
child restr ...
