Buick Enclave: Automatic Transmission Shift Lock Control Function Check - Vehicle Checks - Vehicle Care - Buick Enclave Owner's ManualBuick Enclave: Automatic Transmission Shift Lock Control Function Check

Buick Enclave / Buick Enclave Owner's Manual / Vehicle Care / Vehicle Checks / Automatic Transmission Shift Lock Control Function Check

When you are doing this inspection, the vehicle could move suddenly. If the vehicleWARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.
2. Firmly apply the parking brake. See Parking Brake .
Be ready to apply the regular brake immediately if the vehicle begins to move.
3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ► The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...

    See also:

    Lumbar Adjustment
    Manual Lumbar   If available, move the handle forward or rearward to increase or decrease lumbar support. Power Lumbar If available, press and hold the front or rear of control to incre ...

    Seat belt locking mechanism
    The rear outer seat belts and front passenger seat belts have a locking mechanism which improves the retention of child seats. The procedure to install a child seat is as follows: 1. Place the ch ...

    Xenon lamps
    WARNING High voltage is required to ignite the gas and metal vapor which are used to power Xenon lamps. Contact with this voltage can cause serious injury. Replacement or maintenance of Xeno ...