Buick Enclave: Automatic Transmission Fluid - Vehicle Checks - Vehicle Care - Buick Enclave Owner's ManualBuick Enclave: Automatic Transmission Fluid

It is not necessary to check the transmission fluid level.

► transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to the dealer and have it repaired as soon as possible.

Change the fluid at the intervals listed in Maintenance Schedule , and be sure to use the transmission fluid listed in Recommended Fluids and Lubricants .

Notice: Use of the incorrect automatic transmission fluid may damage the vehicle, and the damages may not be covered by the vehicle warranty. Always use the automatic transmission fluid listed in Recommended Fluids and Lubricants .

The transmission fluid will not reach the end of the dipstick unless the transmission is at operating temperature. If you need to check the transmission fluid level, please take the vehicle to your dealer.

    Engine Oil Life System
    When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, e ...

    Engine Air Cleaner/Filter
    When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the scheduled maintenance intervals and replace it at the first oil change after each 80 000 km (50,000 mile) interva ...

    See also:

    Steps for determining correct load limit
    WARNING Do not exceed the vehicle capacity weight (the total weight of driver, passengers and cargo) given on the tire information label. 1. Locate the statement “The combined weight of occ ...

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the filler plug ...

    ACC malfunction
    If a fault occurs during operation of the system in cruise or follow modes, the ACC system will switch off and cannot be used until the fault is cleared. The message DRIVER INTERVENE appears brief ...