Mercedes-Benz GL-Class: Adjusting the head restraints manually
The head restraints must only be removed
at a qualified specialist workshop.
Mercedes-Benz recommends that you use a Mercedes-Benz Center for this purpose.

► If the head restraint is fully lowered,
it is
necessary to press release catch 1.
► To raise: pull the head restraint up to
the
desired position.
► To lower: press release catch 1 in the
direction of the arrow and push the head
restraint down to the desired position.
Adjusting the angle of the head restraints
WARNING
Vehicles with Rear Seat Entertainment
System: When adjusting the head restraint,
make sure your fingers do not become caught between the head restraint cushion
and the monitor ...
See also:
Using ABS
Do not pump the brakes. Just hold the brake pedal down firmly and let ABS work.
You might hear the ABS pump or motor operating and feel the brake pedal pulsate,
but this is normal. ...
When to Check Lubricant
It is not necessary to regularly check rear axle fluid unless there is a leak
suspected or an unusual noise is heard. A fluid loss could indicate a problem. Have
it inspected and repaired.
All axle ...
Checking bulbs
With all doors closed, apply the parking
brake and push the ignition switch to the
ON position without starting the engine.
The following lights will come on (if so
equipped):
The following ...







