Mercedes-Benz GL-Class: Vehicle remote opening - mbrace - Features - Stowing and features - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Vehicle remote opening

If you have unintentionally locked your vehicle (e.g. the SmartKey is still in the vehicle) and a replacement SmartKey is not available, the vehicle can be opened by a Mercedes-Benz Customer Assistance Center.

The vehicle can be opened remotely up to four days after the ignition was last switched off.

Contact the following service hotlines:

USA: Mercedes-Benz Customer
Assistance Center under 1-800-FORMERCedes( 1-800-367-6372) or
1-888-990-9007

Canada: Customer Service at
1-888-923-8367

You will be asked for your password.

Return to your vehicle at the time agreed upon with the Mercedes-Benz Customer Assistance Center.
Pull the tailgate handle for at least 20 seconds until the indicator lamp in the SOS button flashes.

The Connecting Call message appears on the multifunction display.

Alternatively, the vehicle can also be opened via the Internet or an iPhone in the "Owners Online" section using your ID number and password.

if the corresponding mobile phone network Vehicle remote unlocking is only possible if the corresponding mobile phone network is accessible.

The SOS button flashes and the Call Connected message appears in the multifunction display to confirm that the command for vehicle remote unlocking has been received.

If you pull the tailgate handle for more than 20 seconds before receiving authorization for remote unlocking from the Mercedes- Benz Customer Assistance Center, you must wait 15 minutes before you can pull the tailgate handle again.

    Search & Send
    "Search & Send" is a destination entry service. You can find further information on "Search & Send" in the separate COMAND operating instructions. ...

    Service for recovering a stolen vehicle
    If your vehicle has been stolen: ► Notify the police. The police will issue a numbered incident report. ► This number will be forwarded to the Mercedes-Benz Customer Assistance C ...

    See also:

    Cleaning the exhaust tail pipes
    Impurities combined with the effects of road grit and corrosive environmental factors may cause flash rust to form on the surface. You can restore the original shine of the exhaust tail pipe by cl ...

    Operating the HomeLink® Universal Transceiver
    HomeLink® Universal Transceiver (once programmed) may now be used to activate the garage door, etc. To operate, simply push the appropriate programmed HomeLink® Universal Transceiver button. ...

    Trip computer "From start" or "Fromreset"
    The values in the From Start submenu refer to the start of your journey, while those in the From Reset submenu refer to the last time you reset this submenu. ► Press the button on the s ...