Cadillac Escalade: Using Voice Commands During a Planned Route - Navigation - OnStar Services - OnStar - Cadillac Escalade Owner's ManualCadillac Escalade: Using Voice Commands During a Planned Route

Cadillac Escalade / Cadillac Escalade Owner's Manual / OnStar / OnStar Services / Navigation / Using Voice Commands During a Planned Route

Cancel Route

1. Push ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel. System responds: “OnStar ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?”

2. Say “Yes.” System responds: “OK, route canceled.”

3. Say “Goodbye.” Exits voice commands.

Route Preview

1. Push ready,” then a tone.. System responds: “OnStar ready,” then a tone.

2. Say “Route Preview.” System responds with the next three maneuvers.

3. Say “Goodbye.” Exits voice commands.

Repeat

1. Push ready,” then a tone.. System responds: “OnStar ready,” then a tone.

2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

Get My Destination

1. Push ready,” then a tone.. System responds: “OnStar ready,” then a tone.

2. Say “Get my destination.” System responds with miles to the destination, then responds with “OnStar ready,” then a tone.

3. Say “Goodbye.” Exits voice commands.

    Navigation
    OnStar navigation requires the Directions and Connections service plan. Push to receive directions or have them sent to the vehicle navigation screen. Destinations can also be forwarded to the veh ...

    Other Navigation Services Available from OnStar
    OnStar eNav: Allows subscribers to send destinations from Google Maps and MapQuest.com to their Turn-by-Turn Navigation or screen-based navigation system. When ready, the directions will be download ...

    See also:

    TIREFIT kit version 2
    ► Pull connector 4 with the cable and hose 5 out of the housing. ► Screw hose 5 onto flange 6 of tire sealant bottle 1. ► Insert tire sealant bottle 1 head downwards into re ...

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPMS ...

    Gradient release control (GRC)
    With HDC activated, if the vehicle is stopped on a slope using the foot brake, GRC will become active (except in Terrain response Sand program). During a hill ascent when the foot brake is release ...