Adjusting the four-way lumbarsupport

You can adjust the contour of the driver's seat backrests individually to provide optimum support for your back. 1 To raise the backrest contour 2 To soften the backrest contour 3 To lower the ...

Switching on/off

The three red indicator lamps in the button indicate the heating level you have selected. If the battery voltage is too low, the seat heating may switch off. One or more of the indicator lamp ...

See also:

Safety Belt Pretensioners
This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the s ...

To erase all programing
For first time programing, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer buttons on the transceiver in ...

License plate lamp bulb replacement
1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate. 2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull out the bulb to remove. ...