Range Rover: Switching DSC ON - Stability control - Range Rover Owner's ManualRange Rover: Switching DSC ON

DSC is re-enabled by one of the following:

  • • Press and briefly hold the DSC OFF switch.
  • • Start the engine.
  • • Select a new Terrain response special program.
    Switching DSC OFF
    WARNING Disabling the DSC may adversely affect vehicle stability and braking which in turn can lead to loss of control and increased braking distance, resulting in a rollover or crash. In s ...

    Roll stability control (RSC)
    WARNING No electronic system can remove the need for sake driving practice. RSC can help to maintain control of the vehicle. It cannot regain control of the vehicle if it has been lost, or o ...

    See also:

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back approximately 5.0m(16 ft). The height ...

    Repeat Functionality
    To use Repeat: Press the softkey below or to select between Repeat All and Repeat Track. (Repeat All): Press the softkey below to repeat all tracks. The tab appears lowered when Repeat All ...

    Lamp Messages
    SERVICE LEFT HEADLAMP ASSEMBLY On some models, this message will be displayed when the left headlamp is out and needs to be serviced. See “LED Lighting” in LED Lighting   for more inf ...