Cadillac Escalade: StabiliTrak® System
The vehicle has a traction control system that limits wheel spin and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started.
- To turn off traction control, press and release g on the instrument panel. The appropriate DIC message displays. See Ride Control System Messages .
- To turn off both traction control and StabiliTrak, press and hold g until g illuminates and the appropriate DIC message displays. See Ride Control System Messages .
- Press and release g again to turn on both systems. For more information, see StabiliTrak® System .
Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
The TPMS warning light alerts you to a significant loss in pressure of one of
the vehicle's tires. If the warning light comes on, s ...
See also:
Around ViewTM Monitor settings
To set up the Around View Monitor to your
preferred settings, push the SETTING button,
select the “Other” key and then select
the “Camera” key.
Predictive Course Lines:
When this ite ...
Checklist after driving off-road
WARNING
If you notice sudden significant vibrations or
unusual handling performance or if you
suspect that damage has occurred to the
vehicle, you should activate the hazard
warning l ...
How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A
single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstacl ...
