Buick Enclave: Servicing the Airbag-Equipped Vehicle - Airbag System - Seats and Restraints - Buick Enclave Owner's ManualBuick Enclave: Servicing the Airbag-Equipped Vehicle

Airbags affect how the vehicle should be serviced. There are parts of the airbag system in several places around the vehicle.

Your dealer and the service manual have information about servicing the vehicle and the airbag system.

To purchase a service manual, see Service Publications Ordering Information .

For up to 10 seconds after the vehicle is turned off and the battery is disconnected,WARNING
For up to 10 seconds after the vehicle is turned off and the battery is disconnected, an airbag can still inflate during improper service. You can be injured if you are close to an airbag when it inflates. Avoid yellow connectors.

They are probably part of the airbag system. Be sure to follow proper service procedures, and make sure the person performing work for you is qualified to do so.

    Passenger Sensing System
    The vehicle has a passenger sensing system for the front outboard passenger position. The passenger airbag status indicator will light on the instrument panel when the vehicle is started. United ...

    Adding Equipment to the Airbag-Equipped Vehicle
    Adding accessories that change the vehicle's frame, bumper system, height, front end, or side sheet metal may keep the airbag system from working properly. The operation of the airbag system ca ...

    See also:

    Interior lamp bulb replacement
    Follow the steps illustrated. Insert a new bulb and refit the components. 1. Footwell, puddle and loadspace lamps. 2. Courtesy lamp and map lamps. 3. Vanity mirror lamps. 4. Rear courtesy lamps. ...

    If Steam Is Coming from the Engine Compartment
    WARNING Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Turn it off and get everyone away ...

    Changing engine oil and filter
    Vehicle set-up 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn the engine off and wait more than 15 min ...