Buick Enclave: Rear Climate Control System (Rear Climate Control Only)
A. Fan Control
B. Temperature Control
C. Air Delivery Mode Control
For vehicles with the rear climate control system, the controls are located on the rear of the center console. The system can also be controlled with the front controls.
Press the REAR button on the front climate control system to turn the rear climate control system on or off. An indicator comes on when the rear system is on. The system also turns on if any of the rear controls are adjusted.
Mimic Mode: This mode matches the rear climate control to the front climate control settings. It comes on when REAR is pressed.
Independent Mode: This mode directs rear seating airflow according to the settings of the rear controls. It comes on when any rear control is adjusted.
Fan Control: Turn clockwise or counterclockwise to increase or decrease the fan
speed. Turn the knob to to turn the
fan off.
Temperature Control: Turn clockwise or counterclockwise to increase or decrease the airflow temperature.
Air Delivery Mode Control: Turn to the desired mode to change the airflow direction.
(Vent): Air is directed through
the overhead outlets.
(Bi-Level): Air is directed through
the rear floor outlets, as well as the overhead outlets.
(Floor): Air is directed through
the floor outlets. The rear system floor outlets are located under the third row
seats.
Dual Automatic Climate Control System
The heating, cooling, and ventilation in the vehicle can be controlled with this
system.
A. Fan Control
B. AUTO (Automatic Operation)
C. Defrost
D. Recirculation
E. REAR (Rear Climate Control ...
Rear Climate Control System (Rear Climate with Rear Seat Audio)
A. Fan Control
B. Air Delivery Mode Control
C. Temperature Control
For vehicles with the rear climate control system, the controls are located on
the rear of the center console.
Press the REAR ...
See also:
System self-test
The 42 indicator lamp
illuminates when you:
• turn the SmartKey to position 1 or 2 in the
ignition lock
• on vehicles with KEYLESS-GO, press the
Start/Stop button once or twice
The indica ...
Safety Belt Care
Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts.
It may severely weaken them.
In a crash, they might not be able to provide adequate protection.
Clean safety belts only with m ...
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the ci ...