Mercedes-Benz GL-Class: Message memory menu
The on-board computer saves certain display messages. You can call up the display messages in the message memory menu.
The message memory menu is only shown if any display messages have been stored.
► Press the
button repeatedly, until either
the original menu or the message
memory menu is shown.
If there are display messages, the multifunction display shows, for example, 2
Messages.
► Press the
button to scroll through the
display messages.
When the ignition is switched off, all display messages are deleted apart from some highpriority display messages. Once the causes of the high-priority display messages have been rectified, the corresponding display messages are also deleted.
Hiding display messages
You can hide some display messages with a low priority.
► Press the
,
button on the steering wheel to
select another display.
or
► Press the R reset button on the instrument clus ...
Safety systems
Display messages
Unavailable See Operator's
Manual
Possible causes/consequences and ►
Solutions
Risk of accident
ABS (Anti-lock Braking System), ESP® (Electronic Stability
Program), B ...
See also:
Storing the current speed or calling upthe last stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising ...
RBDS-TMC overview
Radio Data System-Traffic Message Channel (RDS-TMC) is a feature that announces
traffic hold-ups on your route as broadcast by radio stations that transmit TMC
information. Touch the TMC button on ...
Exterior Lamps Off Reminder
If a door is open, a reminder chime sounds when the headlamps or parking lamps
are manually turned on and the key is out of the ignition. To turn off the chime,
turn the headlamp switch to off or AU ...
