Buick Enclave: Interior Lighting - Initial Drive Information - In Brief - Buick Enclave Owner's ManualBuick Enclave: Interior Lighting

Dome Lamps

The dome lamps are located in the overhead console and above the rear seat passengers.

The dome lamps come on when a door is opened, unless the dome lamp override button is pressed in.

To manually turn them on, turn the instrument panel brightness control clockwise to the farthest position.

Dome Lamp Override

The dome lamp override button is next to the exterior lamps control.

The dome lamp override button is next to the exterior lamps control.

in and the dome lamps remain off when a door is opened. DOME OFF: Press the top of the button in and the dome lamps remain off when a door is opened.

An indicator light on the button comes on to show that the dome lamps are off. Press near the bottom of the button so the dome lamps come on when a door is opened.

Reading Lamps

Press the button near each lamp to turn them on or off.

For more information, see:

► Dome Lamps .

► Instrument Panel Illumination Control .

    Steering Wheel Adjustment
    1. Pull the lever (A) down. 2. Move the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. 4. Push the lever (A) up to lock the steering wheel in place. Power ...

    Exterior Lighting
    The exterior lamps control is located on the instrument panel, to the left of the steering wheel. : Turns the automatic light control on or off. AUTO: Automatic operation of the headlamps at ...

    See also:

    Connecting a starting aid
    To start the vehicle using a starting aid or a slave battery, follow the instructions in the sequence given. 1. Connect the positive (Red) booster cable to the positive battery terminal of the di ...

    Fuses and Circuit Breakers
    If the vehicle is a hybrid, see the hybrid supplement for more information. The wiring circuits in the vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusib ...

    Around ViewTM Monitor
    When you push the CAMERA button or shift the selector lever into the R (Reverse) position while the ignition switch is in the ON position, the Around View Monitor operates. The monitor display ...