Cleaning the exhaust tail pipes

Impurities combined with the effects of road grit and corrosive environmental factors may cause flash rust to form on the surface. You can restore the original shine of the exhaust tail pipe by cl ...

Cleaning the display

► Before cleaning the display, make sure that it is switched off and has cooled down. ► Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display ...

See also:

Programming Transmitters to the Vehicle
Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. When the replacement transmitter is ...

Power Mirrors
Controls for the outside power mirrors are located on the driver door. To adjust each mirror: 1. Press (A) or (B) to select the mirror. 2. Press on the control pad to adjust the mirror. 3. Press ...

Speed-dependent mode
If vehicle speed drops below 5 mph (8 km/h) with the wipers operating, the wipers will switch to the next lowest speed. When vehicle speed increases to over 5 mph (8 km/h), the original wiper spee ...