Infiniti QX: How to use INFINITI controller

Choose an item on the display by rotating or pushing the center dial 1 upward/ downward, and push the ENTER button 2 for operation. If you push the BACK button3 before the setup is completed, the setup will be canceled and/or the display will return to the previous screen. This button can also be used to delete characters that have been input. After the setup is completed, push the BACK button3 and return to the previous screen.
For the VOICE button4 functions, refer to the separate Navigation System Owner’s Manual.
Center multi-function control panel
1. “CAMERA” Around View Monitor display
button (P.4-21) 2, 6, 7.For navigation system control buttons
(Refer to the separate Navigation
System Owner’s Manual.)
3. INFINITI controller ( ...
How to use touch screen
CAUTION
► The glass screen on the liquid crystal
display may break if it is hit with a hard
or sharp object. If the glass screen
breaks, do not touch it. Doing so could
result in an ...
See also:
Jump-starting
WARNING
Failure to follow these directions will cause damage to the electronic
components, and can lead
to a battery explosion and severe injury or death.
Never lean over batteries wh ...
Universal Remote System Operation
Press and hold the appropriate button for at least half of a second. The indicator
light will come on while the signal is being transmitted.
Reprogramming Universal Home Remote Buttons
Any of the t ...
Brake Fluid
The brake master cylinder reservoir is filled with DOT 3 brake fluid as indicated
on the reservoir cap.
See Engine Compartment Overview for the location of the reservoir.
There are ...






