Cadillac Escalade: Head Restraint Adjustment - Initial Drive Information - In Brief - Cadillac Escalade Owner's ManualCadillac Escalade: Head Restraint Adjustment

Do not drive until the head restraints for all occupants are installed and adjusted properly.

To achieve a comfortable seating position, change the seatback recline angle as little as necessary while keeping the seat and the head restraint height in the proper position.

See Head Restraints   and Power Seat Adjustment  .

    Heated Rear Seats
    The buttons are on the Rear Sear Audio (RSA) panel on the rear of the center console. Press or to heat the left outboard or right outboard seat cushion and to cycle through the temperature set ...

    Safety Belts
    Refer to the following sections for important information on how to use safety belts properly. Safety Belts  . How to Wear Safety Belts Properly  . Lap-Shoulder Belt  . Low ...

    See also:

    Maximum Gross Vehicle Weight (GVW)/maximum Gross Axle Weight (GAW)
    The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F.M.V.S.S./C.M.V.S.S. certification label. The GVW equals the combined weight of the unloade ...

    Tire pressure label
    The recommended tire pressures are listed on a label located in the driver’s door opening. These pressures provide optimum ride and handling characteristics for all normal operating conditions ...

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back approximately 5.0m(16 ft). The height ...