Rear Wiper Blade Replacement

1. Lift the wiper blade assembly up and out of the park rest position. 2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so ...

Headlamp Aiming

...

See also:

Lift gate release lever
If the lift gate cannot be opened with the door lock switch due to a discharged battery, follow these steps. 1. Remove the cover A inside of the lift gate using a suitable tool. 2. Move th ...

Tire pressure of at least 180 kPa(1.8 bar/26 psi) is not reached
If, after five minutes, a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved: ► Press the on/off switch on the tire inflation compressor to 0. The tire inflation compressor is ...

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the storage compartment on the driver side, at the rear of the vehicle. 1. Press down on the latch tab and pull the cover off to access the stora ...