Mercedes-Benz GL-Class: Changing a wheel and mounting thespare wheel
- Preparing the vehicle
- Securing the vehicle to prevent it fromrolling away
- Raising the vehicle
- Removing a wheel
- Mounting a new wheel
- Lowering the vehicle
Tire pressure of 180 kPa (1.8 bar/26 psi) is reached
► Press the on/off switch on the tire
inflation
compressor to 0.
The tire inflation compressor is switched
off.
► Unscrew the filler hose from the valve of
the faulty tire.
...
Preparing the vehicle
WARNING
The wheel and tire size of the emergency
spare wheel/spare wheel may differ to that of
the damaged wheel. When using an
emergency spare wheel/spare wheel the
handling characte ...
See also:
Troubleshooting guide
The system should respond correctly to all voice commands without difficulty.
If problems are encountered, try the following solutions.
Where the solutions are listed by number, try each solution ...
Vehicles with a TIREFIT kit
► Lift the cargo compartment floor up.
1 Jack
2 Towing eye
3 Ratchet wrench
4 Alignment bolt
5 Fuse allocation chart
6 Folding wheel chock
7 Lug wrench ...
Sunroof
The ignition must be in ON/RUN or ACC/ACCESSORY to operate the sunroof and power
sunshade.
See Retained Accessory Power (RAP) .
The vehicle may have a sunroof over the front seats and a rear sunro ...
