Tire and loading information label

The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. ...

Installing front license plate

To install the front license plate bracket to your vehicle, contact an INFINITI retailer. ...

See also:

Rear lamp removal
To change any of the rear bulbs, it is necessary to completely remove the lamp unit from the vehicle. 1. With the tailgate open, remove the two screws from the inner edge of the unit. 2. Pull th ...

ESP® trailer stabilization
If your vehicle with trailer (vehicle/trailer combination) begins to lurch, you can only stabilize the vehicle/trailer combination by depressing the brake firmly. In this situation, ESP® assist ...

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the storage compartment on the driver side, at the rear of the vehicle. 1. Press down on the latch tab and pull the cover off to access the stora ...