Mercedes-Benz GL-Class: Activating/deactivating climatecontrol
Important information
WARNING
When the climate control system is
deactivated, the outside air supply and
circulation are also deactivated. Only choose
this setting for a short time. Otherwise the
windows could fog up, impairing visibility and
endangering you and others.
Switch on climate control primarily using
the
button.
Switching the front climate control on/off using the front control panel
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
The indicator lamp in the button
lights
up. Airflow and air distribution are set to
automatic mode.
or
► Press the
button.
The indicator lamp in the button
goes
out. The previously selected settings come
into effect again.
► To switch off: press the
button.
The indicator lamp in the button
lights
up.
Switching the rear-compartment climate control on/off using the front control panel
2-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the button
lights
up or goes out.
3-zone automatic climate control
USA only:
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on/off: press the
button.
The indicator lamp in the button
lights
up or goes out.
► Turn the SmartKey to position 2 in the
ignition lock.
► To switch on: press the
button.
ON and MODE are shown in the automatic
climate control display behind the
symbol. The MODE display goes out after
three seconds. The display switches back
to the standard display.
► To switch off: press the
button.
MODE is shown in the display behind the
symbol.
► Press button
.
OFF is shown in the display behind the
symbol.
Switching the rear-compartment climate control on/off using the rear control panel
3-zone automatic climate control
► Turn the SmartKey to position 2 in the
ignition lock.
► Switch on automatic climate control using
the front control panel.
► To switch on: press the
button.
The indicator lamp in the button
lights
up.
► To switch off: press the
button.
The indicator lamp in the button
lights
up.
Activating/deactivating cooling with air dehumidification
Important information
The cooling with air dehumidification function
is only available when the engine is running.
The air inside the vehicle is cooled and
dehumidified according to the temperat ...
See also:
Replacement sensor
Should the sensor require replacing, it should be carried out by a Land Rover
Retailer/ Authorized Repairer.
A replacement sensor must be fitted to a running wheel in order to be recognized
by th ...
Range changing on the move
The recommended method of changing range is with the vehicle stationary. For
experienced off-road drivers, a range change on-the-move can be accomplished, as
detailed below. ...
Setting the Clock
The navigation system time and the analog clock operate independently. Changing
the time through the navigation system does not change the time on the analog clock.
See Clock to change t ...