Cadillac Escalade: Wood Panels
Use a clean cloth moistened in warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Speaker Covers
Vacuum around a speaker cover gently, so that the speaker will not be damaged.
Clean spots with just water and mild soap. ...
Floor Mats
WARNING
If a floor mat is the wrong size or is not properly installed, it can interfere
with the pedals. Interference with the pedals can cause unintended acceleration
and/or increased stopping ...
See also:
Headlamp High/ Low-Beam Changer
Headlamp High/Low-Beam Changer:
Push the turn signal/lane change lever away from you to turn the high beams on.
Pull the lever toward you to return to low beams.
This indicator light turns on i ...
When the System Does Not Seem To Work Properly
Missed alerts can occur under normal circumstances and will increase in wet conditions.
The system does not need to be serviced. SBZA is designed to ignore stationary objects;
however, the system ma ...
Notes on using 3-zone automaticclimate control
The following contains instructions and
recommendations to enable you to get the
most out of your automatic climate control.
• Activate climate control using the
and
buttons. The indicator ...
