Infiniti QX: Welcome light - Instruments and controls - Infiniti QX Owner's ManualInfiniti QX: Welcome light

To activate or deactivate the welcome light

To activate or deactivate the welcome light function, perform the following procedure. 1. Push the ignition switch to the ON position. 2. Open the driver’s side door. 3. Within 20 seconds after the ignition switch is pushed to the ON position, push the door open request switch on the driver’s side door handle for more than 5 seconds with the driver’s door open. 4. A chime sounds when the setting is completed. Once the welcome light function is active, the puddle light A and the passenger cabin illumination will illuminate when you approach the vehicle with the Intelligent Key (within approximately 3.3 ft (1 m) of the antenna built inside the door handles) and the following conditions are met.

► All doors are closed and locked.
► The ignition switch is in the LOCK or OFF position.
► The Intelligent Key is outside the vehicle.
► The puddle light operates within a set duration.

BATTERY SAVER SYSTEM

The welcome light function will be deactivated automatically to prevent battery discharge under the following conditions. To activate the welcome light function again, unlock any door.

► If the welcome light function does not operate within a set duration. Note that the duration is set to 9 days as the factory default setting.
► If the welcome light function is activated 15 consecutive times when you approach and leave the vehicle with the Intelligent Key without the doors being unlocked.

    Moonroof
    WARNING ► In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. ► Do not allow anyone to stand up or extend a ...

    Interior lights
    MAP LIGHTS Push the button as illustrated to turn the light on or off. REAR PERSONAL LIGHTS Push the button as illustrated to turn the light on or off. INTERIOR LIGHT CONTROL SWITCH The ...

    See also:

    Braking
    Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average driver reaction time is about three-fourt ...

    System self-test
    The 42 indicator lamp illuminates when you: • turn the SmartKey to position 1 or 2 in the ignition lock • on vehicles with KEYLESS-GO, press the Start/Stop button once or twice The indica ...

    Feature Settings Menu Items
    The following are customization features that allow you to program settings to the vehicle: DISPLAY IN ENGLISH This feature will only display if a language other than English has been set. This fe ...