Windshield and Wiper Blades

Clean the outside of the windshield with glass cleaner. Clean rubber blades using lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thorough ...

Tires

Use a stiff brush with tire cleaner to clean the tires. Notice: Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/or tires. When applying a tire dressing, a ...

See also:

Grade Braking
The Grade Braking shift modes can be activated by pressing the button on the end of the shift control lever. While in Range Selection Mode, Grade Braking is deactivated allowing the driver to select ...

Operating the jack
1. Locate the jack under the recommended jacking point. 2. Attach the cranking lever to the jack using the adaptor. Fit the wheel nut brace to the end of the cranking lever and rotate clockwise t ...

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Unlock the air only hose (F) from the tire sealant canister (B) by pulling up on the lever. 2. Pull the air only hose (F) from the tire sealant canister (B). 3 ...