Cadillac Escalade: Vehicle Load Limits
It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options.
Two labels on your vehicle show how much weight it was designed to carry, the Tire and Loading Information label and the Certification/Tire label.
WARNING
Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). This can cause systems to break and change the way the vehicle handles. This could cause loss of control and a crash. Overloading can also shorten the life of the vehicle.
- Tire and Loading Information Label
- There is also important loading information on the vehicle Certification/Tire label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rea
- Add-On Equipment
- Automatic Level Control
Recovery Hooks
WARNING
Never pull on recovery hooks from the side. The hooks could break and you and
others could be injured. When using recovery hooks, always pull the vehicle straight
out.
Notice: Never ...
Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is attached to the center
pillar (B-pillar). With the driver door open, you will find the label attached below
the door lock po ...
See also:
Introduction
California proposition 65 warning
WARNING
Engine exhaust, some of its constituents, and certain vehicle components contain
or emit chemicals known to the State of California to cause cancer, ...
INFINITI all-mode 4WD® system
The all mode 4WD system provides 3
positions (AUTO, 4HI and 4LO), so you
can select the desired drive mode according
to the driving conditions.
4WD shift procedure:
1: The 4LO and 4HI indic ...
Manual Operation
(Fan Control): Press the up or down
arrows to increase or decrease the fan speed Pressing this button when the system
is off will turn the system on.
Pressing either arrow while using automatic op ...






