Range Rover: Using ACC
1. SET+: Press to increase or set the speed.
2. Press to resume the set speed.
3. Press to decrease the set speed.
4. CAN: Cancels, but retains the set speed in memory.
5. Press to decrease the gap.
6. Press to increase the gap.
The system is operated by controls mounted on the steering wheel. The driver can also intervene at any time by use of the brake or accelerator pedals.
Setting the vehicle speed, activating, and deactivating ACC, is done in the same way as when using cruise control.
Adaptive cruise control overview
The Adaptive Cruise Control (ACC) system is designed to aid the driver to maintain a gap from the vehicle ahead or a set road speed if there is no slower vehicle ahead. WARNING ACC is not a s ...Entering follow mode
WARNING When in follow mode, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision. Note: Follow mode is an integ ...See also:
Interior lights
MAP LIGHTS
Push the button as illustrated to turn the
light on or off.
REAR PERSONAL LIGHTS
Push the button as illustrated to turn the
light on or off.
INTERIOR LIGHT CONTROL SWITCH
The ...
During a call
There are some options available during a
call. Select one of the following displayed
on the screen if necessary.
► Hang up
Finish the call.
► Use Handset
Transfer the call to th ...
ACC malfunction
If a fault occurs during operation of the system in cruise or follow modes, the
ACC system will switch off and cannot be used until the fault is cleared. The message
DRIVER INTERVENE appears brief ...