Range Rover: Under hood covers - refitting
NOTICE
Before refitting the underhood covers, ensure that no pipes, cables or other items, have been trapped between the cover and casing.
1. Slide the rear edge of the cover under the rubber trim fitted to the scuttle panel.
2. Make sure the front edge of the cover is flush to the casing, and then press down until the cover clicks into place.
Under hood covers - removal
1. Press the tabs to release the cover from the casing. Note: Releasing the inboard tab on the front edge of the cover first will make it easier to release the remaining tabs. 2. Lift the front ...Unblocking washer jets
CAUTION Do not operate the washer jets during unblocking or adjustment. Windshield washer fluid may cause irritation to the eyes and skin. Always read and observe the washer fluid manufactur ...See also:
Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
DISTRONIC activated:
One or two segments in the set speed range
light up.
DISTRONIC detects a vehicle in front:
T ...
Drive-away locking
Drive-away locking automatically locks all the doors when the vehicle is in motion.
This feature can be enabled/disabled via the Vehicle Set-up menu (see 55, INTERACTIVE
CONTROLS.
Note: Pressing ...
Overview of sun visors
WARNING
Do not use the vanity mirror while driving.
Keep the vanity mirrors in the sun visors
closed while the vehicle is in motion.
Reflected glare can endanger you and others.
1 M ...