Range Rover: Tow hitch
WARNING
When handling the tow hitch, hold the bottom of the component. Locking into position occurs automatically and causes the locking lever to rotate under spring pressure.
The tow hitch is stowed in the loadspace tool kit. See 207, TOOL KIT.
The optional trailer hitch is rated as a Class III. When selecting a drawbar for the receiver, the following dimensions must be adhered to:
A. Drawbar length = 9 inches (228 mm).
B. Drawbar rise = 1.5 inches (38 mm).
Consult your Land Rover Retailer/Authorized Repairer for the most up-to-date information.
Essential towing checks
• When calculating the laden weight of the trailer, remember to include
the weight of the trailer, plus the weight of the load.
• If the load can be divided between the vehicle and trailer ...
Fitting the detachable tow hitch
1. Remove the protective cover from the tow hitch and stow it in the tow hitch
stowage area.
2. The tow hitch can only be installed when the green locking lever is in the
unlocked position.
3. ...
See also:
Towing a trailer
WARNING
Do not exceed the Gross Vehicle Weight (GVW), maximum rear axle weight, maximum
trailer weight or tow hitch load (tongue weight). Exceeding any of these limits
could cause instabilit ...
Replacing the Engine Air Cleaner/ Filter
1. Locate the air cleaner/filter assembly. See Engine Compartment Overview
.
2. Loosen the four screws on the cover of the housing and lift up the cover.
3. Remove the engine air cleaner/ ...
Daytime running lamps
Daytime running lamps in Canada
The "daytime running lamps" function is
required by law in Canada. It cannot therefore
be deactivated.
► Turn the light switch to
.
With the e ...
