Mercedes-Benz GL-Class: Tire tread - Operation - Wheels and tires - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Tire tread

WARNING Although the applicable federal motor vehicle 
Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recommend that you do not allow your tires to wear down to that level. As tread depth approaches 1/8 in (3 mm), the adhesion properties on a wet road are sharply reduced.
Depending upon the weather and/or road surface (conditions), the tire traction varies widely.

Do not use tires that are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1/8 inch (3 mm).

Tread wear indicators (TWI) are required by law. Six indicators are positioned over the tire tread. They are visible as soon as a tread depth of approx. 1/16 inch (1.6 mm) is reached. If this is the case, the tire is so worn that it must be replaced.

The recommended tread depth for summer tires is at least 1/8 inch (3 mm). The recommended tread depth for winter tires is at least 1/6 inch (4 mm).

Bar marking 1 for tread wear is integrated

Bar marking 1 for tread wear is integrated into the tire tread.

    Notes on regularly inspecting wheelsand tires
    WARNING   Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause acci ...

    Notes on selecting, mounting andreplacing tires
    • Only mount tires and wheels of the same type and make. • Only mount tires of the correct size onto the wheels. • After mounting new tires, run them in at moderate speeds for the first 60 ...

    See also:

    Insuring the Vehicle
    Protect your investment in the GM vehicle with comprehensive and collision insurance coverage. There are significant differences in the quality of coverage afforded by various insurance policy terms ...

    Using ACC
    1. SET+: Press to increase or set the speed. 2. Press to resume the set speed. 3. Press to decrease the set speed. 4. CAN: Cancels, but retains the set speed in memory. 5. Press to decrease the ...

    Used Replacement Wheels
    WARNING Replacing a wheel with a used one is dangerous. How it has been used or how far it has been driven may be unknown. It could fail suddenly and cause a crash. When replacing wheels, use a ...