 Cadillac Escalade: Tire Pressure Monitor Operation
Cadillac Escalade: Tire Pressure Monitor Operation
				
				This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel assembly, excluding the spare tire and wheel assembly. The TPMS sensors monitor the air pressure in the tires and transmit the tire pressure readings to a receiver located in the vehicle.

When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light located on the instrument cluster. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the tire loading information label. See Vehicle Load Limits .
A message to check the pressure in a specific tire displays in the Driver Information Center (DIC). The low tire pressure warning light and the DIC warning message come on at each ignition cycle until the tires are inflated to the correct inflation pressure. Using the DIC, tire pressure levels can be viewed. For additional information and details about the DIC operation and displays see Driver Information Center (DIC) and Tire Messages .
The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This could be an early indicator that the air pressure is getting low and needs to be inflated to the proper pressure.
A Tire and Loading Information label shows the size of the original equipment tires and the correct inflation pressure for the tires when they are cold. See Vehicle Load Limits , for an example of the Tire and Loading Information label and its location. Also see Tire Pressure .
The TPMS can warn about a low tire pressure condition but it does not replace normal tire maintenance. See Tire Inspection , Tire Rotation and Tires .
Notice: Tire sealant materials are not all the same. A non-approved tire sealant could damage the TPMS sensors. TPMS sensor damage caused by using an incorrect tire sealant is not covered by the vehicle warranty. Always use only the GM-approved tire sealant available through your dealer or included in the vehicle.
Factory-installed Tire Inflator Kits use a GM approved liquid tire sealant. Using non-approved tire sealants could damage the TPMS sensors. See Tire Sealant and Compressor Kit for information regarding the inflator kit materials and instructions.
 Federal Communications Commission (FCC) Rules and with Industry Canada Standards
Federal Communications Commission (FCC) Rules and with Industry Canada Standards
   See Radio Frequency Statement   for information regarding Part 15
of the Federal Communications Commission (FCC) Rules and with Industry Canada Standards
RSS-GEN/210/220/310. ...
    TPMS Malfunction Light and Message
TPMS Malfunction Light and Message
   The TPMS will not function properly if one or more of the TPMS sensors are missing
or inoperable. When the system detects a malfunction, the low tire warning light
flashes for about one minute and t ...
   See also:
Securing the load
   
There are tie down hooks located in the 
cargo area as shown. The tie down hooks 
can be used to secure cargo with ropes or 
other types of straps.
Do not apply a total load of more than 22 
lb ...
   
Braking
   Braking action involves perception time and reaction time. Deciding to push the
brake pedal is perception time. Actually doing it is reaction time.
Average driver reaction time is about three-quarte ...
   
Electric seats
   
 
WARNING
Do not adjust the seat while the vehicle is moving. Doing so could cause loss 
of vehicle control and personal injury.
1. Bolster adjustment:
A. Bolster inflate.
B. Bolster deflate ...
   











