Mercedes-Benz GL-Class: Storing the current speed or calling upthe last stored speed - DISTRONIC - Driving systems - Driving and parking - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Storing the current speed or calling upthe last stored speed

WARNING The set speed stored in memory should only 
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

Briefly pull the cruise control lever towards you 4.

Remove your foot from the accelerator pedal.

DISTRONIC is activated and accepts the current speed if it is activated for the first time, or adjusts the vehicle's speed to the last speed stored.

    Making adjustments in 5 mph (Canada:10 km/h) increments
    ► Briefly press the cruise control lever beyond the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...

    Setting the specified minimum distance
    You can set the specified minimum distance for DISTRONIC by varying the time span between one and two seconds. This time span determines the distance that DISTRONIC should maintain from the vehicl ...

    See also:

    Switching off the engine
    Before stopping the engine, ensure that the vehicle is parked safely with the parking brake applied and P selected. Press and release the engine START/STOP button to stop the engine. The audio, t ...

    Door Ajar Messages
    DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obst ...

    Transfer gearbox
    1. High range (Hi): Hi should be used for all normal road driving and also for off-road driving across dry, level terrain. 2. Low range (Lo): Lo should only be used in situations where low spee ...