Buick Enclave: Starting and Operating
- New Vehicle Break-In
- Ignition Positions
- Starting the Engine
- Engine Heater
- Retained Accessory Power (RAP)
- Shifting Into Park
- Shifting out of Park
- Parking over Things That Burn
Vehicle Load Limits
It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed ...New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: ► If you have all-wheel drive, keep your speed at 88 km/h ( ...See also:
Locking and arming the alarm
WARNING
Before exiting the vehicle, always ensure that the gear selector is in the Park
(P) position, the engine is turned off, the parking brake is applied and the Smart
Key is removed from ...
Inserting the mounting elements intothe loading rail
You can slide mounting element 2 in loading
rail 1 to various detents and secure it. These
detents are marked and positioned at 5-cm
intervals along loading rail 1.
You can turn mounting eleme ...
Power Outlets
The accessory power outlets can be used to plug in electrical equipment, such
as a cell phone or MP3 player.
The vehicle has three accessory power outlets located:
Inside the floor console stora ...