Buick Enclave: StabiliTrak® System
The vehicle has a traction control system that limits wheel spin, and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions.
Both systems turn on automatically every time the vehicle is started.
► To turn off traction control, press and release
located on the instrument panel, and
the appropriate DIC message displays. See Ride Control System Messages .
► Press and release 
again to turn on
the traction control system. The StabiliTrak system remains on.
For more information, see StabiliTrak® System .
Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
The TPMS warning light alerts you to a significant loss in pressure of one of
the vehicle's tires. If the warning light comes on, ...
See also:
Fuels in Foreign Countries
Never use leaded gasoline or any other fuel not recommended in the previous text
on fuel. Costly repairs caused by use of improper fuel would not be covered by the
vehicle warranty.
To check the ...
Switching DSC ON
DSC is re-enabled by one of the following:
• Press and briefly hold the DSC OFF switch.
• Start the engine.
• Select a new Terrain response special program.
...
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with Four-Wheel Drive
(4WD) should never be tested using a two
wheel dynamometer (such as the dynamometers
used by some states for emissions
testing), or similar equipment. ...
